ACIL FM

Pilih semua

Nama	Ukuran	Aksi
File	-	Open
Gofer	-	Open
DBM.pm	50.88 MB	View DL Edit
ExampleP.pm	12.12 MB	View DL Edit
File.pm	39.81 MB	View DL Edit
Gofer.pm	47.93 MB	View DL Edit
Mem.pm	9.89 MB	View DL Edit
NullP.pm	5.91 MB	View DL Edit
Sponge.pm	7.78 MB	View DL Edit

Edit file: /usr/lib64/perl5/vendor_perl/DBD/ExampleP.pm

{
    package DBD::ExampleP;

use strict;
    use Symbol;

use DBI qw(:sql_types);

require File::Spec;
   
    our (@EXPORT,$VERSION,@statnames,%statnames,@stattypes,%stattypes,
	@statprec,%statprec,$drh,);

@EXPORT = qw(); # Do NOT @EXPORT anything.
    $VERSION = "12.014311";

#   $Id: ExampleP.pm 14310 2010-08-02 06:35:25Z Jens $
#
#   Copyright (c) 1994,1997,1998 Tim Bunce
#
#   You may distribute under the terms of either the GNU General Public
#   License or the Artistic License, as specified in the Perl README file.

@statnames = qw(dev ino mode nlink
	uid gid rdev size
	atime mtime ctime
	blksize blocks name);
    @statnames{@statnames} = (0 .. @statnames-1);

@stattypes = (SQL_INTEGER, SQL_INTEGER, SQL_INTEGER, SQL_INTEGER,
	SQL_INTEGER, SQL_INTEGER, SQL_INTEGER, SQL_INTEGER,
	SQL_INTEGER, SQL_INTEGER, SQL_INTEGER,
	SQL_INTEGER, SQL_INTEGER, SQL_VARCHAR);
    @stattypes{@statnames} = @stattypes;
    @statprec = ((10) x (@statnames-1), 1024);
    @statprec{@statnames} = @statprec;
    die unless @statnames == @stattypes;
    die unless @statprec  == @stattypes;

$drh = undef;	# holds driver handle once initialised
    #$gensym = "SYM000"; # used by st::execute() for filehandles

sub driver{
	return $drh if $drh;
	my($class, $attr) = @_;
	$class .= "::dr";
	($drh) = DBI::_new_drh($class, {
	    'Name' => 'ExampleP',
	    'Version' => $VERSION,
	    'Attribution' => 'DBD Example Perl stub by Tim Bunce',
	    }, ['example implementors private data '.__PACKAGE__]);
	$drh;
    }

sub CLONE {
	undef $drh;
    }
}

{   package DBD::ExampleP::dr; # ====== DRIVER ======
    $imp_data_size = 0;
    use strict;

sub connect { # normally overridden, but a handy default
        my($drh, $dbname, $user, $auth)= @_;
        my ($outer, $dbh) = DBI::_new_dbh($drh, {
            Name => $dbname,
            examplep_private_dbh_attrib => 42, # an example, for testing
        });
        $dbh->{examplep_get_info} = {
            29 => '"',  # SQL_IDENTIFIER_QUOTE_CHAR
            41 => '.',  # SQL_CATALOG_NAME_SEPARATOR
            114 => 1,   # SQL_CATALOG_LOCATION
        };
        #$dbh->{Name} = $dbname;
        $dbh->STORE('Active', 1);
        return $outer;
    }

sub data_sources {
	return ("dbi:ExampleP:dir=.");	# possibly usefully meaningless
    }

}

{   package DBD::ExampleP::db; # ====== DATABASE ======
    $imp_data_size = 0;
    use strict;

sub prepare {
	my($dbh, $statement)= @_;
	my @fields;
	my($fields, $dir) = $statement =~ m/^\s*select\s+(.*?)\s+from\s+(\S*)/i;

if (defined $fields and defined $dir) {
	    @fields = ($fields eq '*')
			? keys %DBD::ExampleP::statnames
			: split(/\s*,\s*/, $fields);
	}
	else {
	    return $dbh->set_err($DBI::stderr, "Syntax error in select statement (\"$statement\")")
		unless $statement =~ m/^\s*set\s+/;
	    # the SET syntax is just a hack so the ExampleP driver can
	    # be used to test non-select statements.
	    # Now we have DBI::DBM etc., ExampleP should be deprecated
	}

my ($outer, $sth) = DBI::_new_sth($dbh, {
	    'Statement'     => $statement,
            examplep_private_sth_attrib => 24, # an example, for testing
	}, ['example implementors private data '.__PACKAGE__]);

my @bad = map {
	    defined $DBD::ExampleP::statnames{$_} ? () : $_
	} @fields;
	return $dbh->set_err($DBI::stderr, "Unknown field names: @bad")
		if @bad;

$outer->STORE('NUM_OF_FIELDS' => scalar(@fields));

$sth->{examplep_ex_dir} = $dir if defined($dir) && $dir !~ /\?/;
	$outer->STORE('NUM_OF_PARAMS' => ($dir) ? $dir =~ tr/?/?/ : 0);

if (@fields) {
	    $outer->STORE('NAME'     => \@fields);
	    $outer->STORE('NULLABLE' => [ (0) x @fields ]);
	    $outer->STORE('SCALE'    => [ (0) x @fields ]);
	}

$outer;
    }

sub table_info {
	my $dbh = shift;
	my ($catalog, $schema, $table, $type) = @_;

my @types = split(/["']*,["']/, $type || 'TABLE');
	my %types = map { $_=>$_ } @types;

# Return a list of all subdirectories
	my $dh = Symbol::gensym(); # "DBD::ExampleP::".++$DBD::ExampleP::gensym;
	my $dir = $catalog || File::Spec->curdir();
	my @list;
	if ($types{VIEW}) {	# for use by test harness
	    push @list, [ undef, "schema",  "table",  'VIEW', undef ];
	    push @list, [ undef, "sch-ema", "table",  'VIEW', undef ];
	    push @list, [ undef, "schema",  "ta-ble", 'VIEW', undef ];
	    push @list, [ undef, "sch ema", "table",  'VIEW', undef ];
	    push @list, [ undef, "schema",  "ta ble", 'VIEW', undef ];
	}
	if ($types{TABLE}) {
	    no strict 'refs';
	    opendir($dh, $dir)
		or return $dbh->set_err(int($!), "Failed to open directory $dir: $!");
	    while (defined(my $item = readdir($dh))) {
                if ($^O eq 'VMS') {
                    # if on VMS then avoid warnings from catdir if you use a file
                    # (not a dir) as the item below
                    next if $item !~ /\.dir$/oi;
                }
                my $file = File::Spec->catdir($dir,$item);
		next unless -d $file;
		my($dev, $ino, $mode, $nlink, $uid) = lstat($file);
		my $pwnam = undef; # eval { scalar(getpwnam($uid)) } || $uid;
		push @list, [ $dir, $pwnam, $item, 'TABLE', undef ];
	    }
	    close($dh);
	}
	# We would like to simply do a DBI->connect() here. However,
	# this is wrong if we are in a subclass like DBI::ProxyServer.
	$dbh->{'dbd_sponge_dbh'} ||= DBI->connect("DBI:Sponge:", '','')
	    or return $dbh->set_err($DBI::err,
			"Failed to connect to DBI::Sponge: $DBI::errstr");

my $attr = {
	    'rows' => \@list,
	    'NUM_OF_FIELDS' => 5,
	    'NAME' => ['TABLE_CAT', 'TABLE_SCHEM', 'TABLE_NAME',
		    'TABLE_TYPE', 'REMARKS'],
	    'TYPE' => [DBI::SQL_VARCHAR(), DBI::SQL_VARCHAR(),
		    DBI::SQL_VARCHAR(), DBI::SQL_VARCHAR(), DBI::SQL_VARCHAR() ],
	    'NULLABLE' => [1, 1, 1, 1, 1]
	};
	my $sdbh = $dbh->{'dbd_sponge_dbh'};
	my $sth = $sdbh->prepare("SHOW TABLES FROM $dir", $attr)
	    or return $dbh->set_err($sdbh->err(), $sdbh->errstr());
	$sth;
    }

sub type_info_all {
	my ($dbh) = @_;
	my $ti = [
	    {	TYPE_NAME	=> 0,
		DATA_TYPE	=> 1,
		COLUMN_SIZE	=> 2,
		LITERAL_PREFIX	=> 3,
		LITERAL_SUFFIX	=> 4,
		CREATE_PARAMS	=> 5,
		NULLABLE	=> 6,
		CASE_SENSITIVE	=> 7,
		SEARCHABLE	=> 8,
		UNSIGNED_ATTRIBUTE=> 9,
		FIXED_PREC_SCALE=> 10,
		AUTO_UNIQUE_VALUE => 11,
		LOCAL_TYPE_NAME	=> 12,
		MINIMUM_SCALE	=> 13,
		MAXIMUM_SCALE	=> 14,
	    },
	    [ 'VARCHAR', DBI::SQL_VARCHAR, 1024, "'","'", undef, 0, 1, 1, 0, 0,0,undef,0,0 ],
	    [ 'INTEGER', DBI::SQL_INTEGER,   10, "","",   undef, 0, 0, 1, 0, 0,0,undef,0,0 ],
	];
	return $ti;
    }

sub ping {
	(shift->FETCH('Active')) ? 2 : 0;    # the value 2 is checked for by t/80proxy.t
    }

sub disconnect {
	shift->STORE(Active => 0);
	return 1;
    }

sub get_info {
	my ($dbh, $info_type) = @_;
	return $dbh->{examplep_get_info}->{$info_type};
    }

sub FETCH {
	my ($dbh, $attrib) = @_;
	# In reality this would interrogate the database engine to
	# either return dynamic values that cannot be precomputed
	# or fetch and cache attribute values too expensive to prefetch.
	# else pass up to DBI to handle
	return $INC{"DBD/ExampleP.pm"} if $attrib eq 'example_driver_path';
	return $dbh->SUPER::FETCH($attrib);
    }

sub STORE {
	my ($dbh, $attrib, $value) = @_;
	# store only known attributes else pass up to DBI to handle
        if ($attrib eq 'examplep_set_err') {
            # a fake attribute to enable a test case where STORE issues a warning
            $dbh->set_err($value, $value);
            return;
        }
	if ($attrib eq 'AutoCommit') {
	    # convert AutoCommit values to magic ones to let DBI
	    # know that the driver has 'handled' the AutoCommit attribute
	    $value = ($value) ? -901 : -900;
	}
	return $dbh->{$attrib} = $value if $attrib =~ /^examplep_/;
	return $dbh->SUPER::STORE($attrib, $value);
    }

sub DESTROY {
	my $dbh = shift;
	$dbh->disconnect if $dbh->FETCH('Active');
	undef
    }

# This is an example to demonstrate the use of driver-specific
    # methods via $dbh->func().
    # Use it as follows:
    #   my @tables = $dbh->func($re, 'examplep_tables');
    #
    # Returns all the tables that match the regular expression $re.
    sub examplep_tables {
	my $dbh = shift; my $re = shift;
	grep { $_ =~ /$re/ } $dbh->tables();
    }

sub parse_trace_flag {
	my ($h, $name) = @_;
	return 0x01000000 if $name eq 'foo';
	return 0x02000000 if $name eq 'bar';
	return 0x04000000 if $name eq 'baz';
	return 0x08000000 if $name eq 'boo';
	return 0x10000000 if $name eq 'bop';
	return $h->SUPER::parse_trace_flag($name);
    }

sub private_attribute_info {
        return { example_driver_path => undef };
    }
}

{   package DBD::ExampleP::st; # ====== STATEMENT ======
    $imp_data_size = 0;
    use strict; no strict 'refs'; # cause problems with filehandles

sub bind_param {
	my($sth, $param, $value, $attribs) = @_;
	$sth->{'dbd_param'}->[$param-1] = $value;
	return 1;
    }

sub execute {
	my($sth, @dir) = @_;
	my $dir;

if (@dir) {
	    $sth->bind_param($_, $dir[$_-1]) or return
		foreach (1..@dir);
	}

my $dbd_param = $sth->{'dbd_param'} || [];
	return $sth->set_err(2, @$dbd_param." values bound when $sth->{NUM_OF_PARAMS} expected")
	    unless @$dbd_param == $sth->{NUM_OF_PARAMS};

return 0 unless $sth->{NUM_OF_FIELDS}; # not a select

$dir = $dbd_param->[0] || $sth->{examplep_ex_dir};
	return $sth->set_err(2, "No bind parameter supplied")
	    unless defined $dir;

$sth->finish;

#
	# If the users asks for directory "long_list_4532", then we fake a
	# directory with files "file4351", "file4350", ..., "file0".
	# This is a special case used for testing, especially DBD::Proxy.
	#
	if ($dir =~ /^long_list_(\d+)$/) {
	    $sth->{dbd_dir} = [ $1 ];	# array ref indicates special mode
	    $sth->{dbd_datahandle} = undef;
	}
	else {
	    $sth->{dbd_dir} = $dir;
	    my $sym = Symbol::gensym(); # "DBD::ExampleP::".++$DBD::ExampleP::gensym;
	    opendir($sym, $dir)
                or return $sth->set_err(2, "opendir($dir): $!");
	    $sth->{dbd_datahandle} = $sym;
	}
	$sth->STORE(Active => 1);
	return 1;
    }

sub fetch {
	my $sth = shift;
	my $dir = $sth->{dbd_dir};
	my %s;

if (ref $dir) {		# special fake-data test mode
	    my $num = $dir->[0]--;
	    unless ($num > 0) {
		$sth->finish();
		return;
	    }
	    my $time = time;
	    @s{@DBD::ExampleP::statnames} =
		( 2051, 1000+$num, 0644, 2, $>, $), 0, 1024,
	          $time, $time, $time, 512, 2, "file$num")
	}
	else {			# normal mode
            my $dh  = $sth->{dbd_datahandle}
                or return $sth->set_err($DBI::stderr, "fetch without successful execute");
	    my $f = readdir($dh);
	    unless ($f) {
		$sth->finish;
		return;
	    }
	    # untaint $f so that we can use this for DBI taint tests
	    ($f) = ($f =~ m/^(.*)$/);
	    my $file = File::Spec->catfile($dir, $f);
	    # put in all the data fields
	    @s{ @DBD::ExampleP::statnames } = (lstat($file), $f);
	}

# return just what fields the query asks for
	my @new = @s{ @{$sth->{NAME}} };

return $sth->_set_fbav(\@new);
    }
    *fetchrow_arrayref = \&fetch;

sub finish {
	my $sth = shift;
	closedir($sth->{dbd_datahandle}) if $sth->{dbd_datahandle};
	$sth->{dbd_datahandle} = undef;
	$sth->{dbd_dir} = undef;
	$sth->SUPER::finish();
	return 1;
    }

sub FETCH {
	my ($sth, $attrib) = @_;
	# In reality this would interrogate the database engine to
	# either return dynamic values that cannot be precomputed
	# or fetch and cache attribute values too expensive to prefetch.
	if ($attrib eq 'TYPE'){
	    return [ @DBD::ExampleP::stattypes{ @{ $sth->FETCH(q{NAME_lc}) } } ];
	}
	elsif ($attrib eq 'PRECISION'){
	    return [ @DBD::ExampleP::statprec{  @{ $sth->FETCH(q{NAME_lc}) } } ];
	}
	elsif ($attrib eq 'ParamValues') {
	    my $dbd_param = $sth->{dbd_param} || [];
	    my %pv = map { $_ => $dbd_param->[$_-1] } 1..@$dbd_param;
	    return \%pv;
	}
	# else pass up to DBI to handle
	return $sth->SUPER::FETCH($attrib);
    }

sub STORE {
	my ($sth, $attrib, $value) = @_;
	# would normally validate and only store known attributes
	# else pass up to DBI to handle
	return $sth->{$attrib} = $value
	    if $attrib eq 'NAME' or $attrib eq 'NULLABLE' or $attrib eq 'SCALE' or $attrib eq 'PRECISION';
	return $sth->SUPER::STORE($attrib, $value);
    }

*parse_trace_flag = \&DBD::ExampleP::db::parse_trace_flag;
}

1;
# vim: sw=4:ts=8

Batal

Isi Zip:

Create